[<<Erster] [<zurück] [weiter>] [Letzter>>] 20 Artikel in dieser Kategorie

Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar

239,00 EUR
(inkl. 20% MwSt.)
 
Artikeldatenblatt drucken
Art.Nr.: 1150-Notos-Rot
Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar
Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar
Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar
Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar
Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar
Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar
Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar
Notos F3K Segler, Rot, Bausatz, nicht mehr lieferbar
Der Notos von YPSI ist ein F3K Modell für ambitionierte SAL / F3K Piloten. Die Tragflächen sind in der Form gebaut. Glasfaserbeschichtet mit einem Schaumkern und Kohlefaserverstärkungen. Das Rumpfvorderteil ist 2,4GHz tauglich aus Glasfaser gebaut. Das Rumpfrohr aus Kohlefaser.Es sind keine elektronischen Komponenten und keine Kleinteile im Lieferumfang enthalten. Der Bau des Modells erfordert einiges an Erfahrung und Geschick. 


Technische Daten
  • Spannweite: 1500mm
  • Länge:
  • Gewicht Tragflächen: ca. xxxg
  • Gewicht Rumpf: ca. xxg
  • Gewicht HLW/SLW: ca. xxg
  • Gesamtgewicht flugfertig: ca 290g
Lieferumfang
  • Tragflächenhälften
  • Rumpfvorderteil
  • Rumpfrohr
  • Seiteneitwerk (Ruderanschlag für Rechtshänder)
  • Höhenleiterk
  • Kohlefaserteil zur HLW Befestigung
  • Wurfpin
  • Kohlefasermatte zur Flächenverbindung
  • M3 Schrauben zur Befestigung der Tragflächen
Es sind keine elektronischen Komponenten und keine Kleinteile im Lieferumfang enthalten. Der Bau des Modells erfordert einiges an Erfahrung und Geschick.



NOTOS Videos:

http://www.youtube.com/watch?v=JVUFqFJqIU4

http://www.youtube.com/watch?v=9W00PxcPjUM

http://www.youtube.com/watch?v=PuDGY3MO8W0



NOTOS thread im Forum:

http://www.rc-network.de/forum/showthread.php/269373-NOTOS-DLG/page2



Ausführlicher, sehr hilfreicher Baubericht:


http://www.rc-heli-fan.org/sonstiges-f89/ypsi-notos-dlg-f3k-segler-kleiner-baubericht-t92016.html
-----


Our previous F3K sailplane has been completely redesigned and that's why the new model deserves a new name - Notos. When designing this ship we used a new and more reliable wing construction with a double "A" shaped spar. This construction transfers forces from the peg directly to the M3 screws holding the wing on the pod. Spars are situated far from the axis of wing torsion and thus making the whole wing more robust as far as torsion forces are concerned. Moreover when the sailplane crashes and hits the ground, a normal wing is usually torn in areas between the base rib and the end of aileron. Due to the “A” shaped spar construction, the Notos wing is more durable in those kind of situations. This kind of construction is unique and has not been used by any
manufacturer of F3K sailplanes so far. The wing has also been strengthened on the leading edge using a carbon roving and on the tips using carbon cloth. Also a carbon covering of the servos is a standard solution these days.

The new shape of the wing improves the turning abilities. The profile, which was designed especially for this model, provides minimal resistance of the wing during hard launches as well as very good performance during normal flight.

Another new feature of this sailplane is the carbon tail mount that replaces the balsa mount used by the Notos predecessor. The main advantages of the new tail mount are the lower weight and lower front resistance.

Also a completely new pod with minimal front resistance and maximal robustness has been designed for Notos. A nice detail is the new peg, which is manufactured by pressing carbon fibres in a special mould. The peg profile is asymmetric and therefore allows safe and hard launch of the plane without hurting your fingers.

Kit contents:

• Wing: glass fiber composite / XPS, carbon reinforced, comes in two halves. Wingspan 1500mm,
weight 65+ 65g
• Elevator, rudder: glass fiber composite / XPS, carbon reinforced, weight 15g together
• Pod: glass fiber composite, carbon reinforced, 2,4GHz friendly, weight 30g max
• Boom: carbon / glass fiber composite, weight 13g when adjusted to final length
• Tail mount: carbon composite in negative mould, weight 1g
• Peg: flat carbon composite in negative mould, weight 1,5g
• carbon cloth for wing halves joining
• M3 screws for wing mounting

Assembly:
Join the wing halves together, glue the rudder and the elevator on the boom, glue the boom on the
pod, fabricate holes for the wing screws, install electronics.
Akku:
Nein
NiMh 400mAh, 4Stk. ( + 10,00 EUR )
NiMh 350mAh, 4stk ( + 9,00 EUR )
Ballastset:
Nein
ja, ca.180g (Bausatz) ( + 19,00 EUR )
Schutztaschenset:
Nein
Ja ( + 29,90 EUR )